Kerala Plus One Physics Chapter 1 — Units and Measurement (യൂണിറ്റുകളും അളവുകളും) is the foundation chapter of the DHSE Kerala Higher Secondary First Year (Class 11) Physics syllabus for the 2026–27 academic session. Under the revised SCERT Kerala and NCERT rationalised curriculum, this chapter carries high weightage in the First Term (Onam Exam), Second Term (Christmas Exam), Public Board Exam, and entrance examinations like KEAM, NEET, and JEE Main.
- Chapter 1 Overview and Weightage in Kerala DHSE Exam (പാഠഭാഗത്തിന്റെ സംഗ്രഹം)
- Quick Revision Notes: Units and Measurement (പ്രധാന പോയിന്റുകൾ)
- 1. Physical Quantities and Units (ഭൗതിക അളവുകളും യൂണിറ്റുകളും)
- 2. The International System of Units (SI Base Units Table)
- 3. Rules for Counting Significant Figures (സിഗ്നിഫിക്കന്റ് ഫിഗറുകൾ)
- 4. Dimensions and Dimensional Formulas (മാന സമവാക്യങ്ങൾ)
- 1 Mark Questions and Answers — Units and Measurement (ഒരു മാർക്ക് ചോദ്യങ്ങൾ)
- 2 Mark Questions and Answers — Kerala Board Pattern (രണ്ട് മാർക്ക് ചോദ്യങ്ങൾ)
- 3 Mark Questions and Answers — Most Repeated PYQs (മൂന്ന് മാർക്ക് ചോദ്യങ്ങൾ)
- 5 Mark Essay & Derivation Questions (അഞ്ച് മാർക്ക് ചോദ്യങ്ങൾ)
- Frequently Asked Questions (FAQ) — Kerala Plus One Physics Chapter 1
- 1. Is “Physical World” still Chapter 1 in the Kerala Plus One Physics 2026–27 Syllabus?
- 2. Which is the most important 3-mark or 5-mark question from Units and Measurement for the DHSE Kerala exam?
- 3. How can I download the Kerala Plus One Physics Chapter 1 Notes PDF in English and Malayalam Medium?
In this complete study guide by Kerala Study Hub (KeralaStudyHub.in), students get chapter-wise revision notes, SI unit tables, complete dimensional formulas, solved numerical problems, and 1 Mark, 2 Mark, 3 Mark, and 5 Mark Questions and Answers in both English and Malayalam Medium references.

Chapter 1 Overview and Weightage in Kerala DHSE Exam (പാഠഭാഗത്തിന്റെ സംഗ്രഹം)
Understanding how physical quantities are measured, expressed in International System (SI) units, and verified using dimensional analysis helps students score full marks in short-answer and essay questions.
| Exam Feature | Details for 2026–27 Kerala Syllabus |
| Board / Authority | DHSE & SCERT Kerala (Higher Secondary Class 11) |
| Subject | Physics (ഭൗതികശാസ്ത്രം) |
| Chapter Number & Name | Chapter 1: Units and Measurement (യൂണിറ്റുകളും അളവുകളും) |
| Medium Available | English Medium (EM) & Malayalam Medium (MM) |
| Expected Weightage | 4 to 6 Marks (Public Exam) / 8 to 10 Marks (Onam Term Exam) |
| Key High-Scoring Topics | SI Base Units, Significant Figures, Principle of Homogeneity, Applications of Dimensional Analysis |
Quick Revision Notes: Units and Measurement (പ്രധാന പോയിന്റുകൾ)
1. Physical Quantities and Units (ഭൗതിക അളവുകളും യൂണിറ്റുകളും)
Any quantity that can be measured and in terms of which the laws of physics are described is called a physical quantity (ഭൗതിക അളവ്). A standard reference chosen to measure any physical quantity of the same kind is called a unit (യൂണിറ്റ്).
- Fundamental (Base) Quantities: Quantities that are independent of other physical quantities and cannot be resolved further (Length, Mass, Time, Electric Current, Thermodynamic Temperature, Amount of Substance, and Luminous Intensity).
- Derived Quantities: Quantities that are derived from fundamental quantities by multiplication or division (Velocity, Acceleration, Force, Work, Pressure, Energy, Power).
2. The International System of Units (SI Base Units Table)
The SI system (Système International d’Unités) is based on seven base units and two supplementary plane and solid angle units (Radian and Steradian).
| Base Quantity (അടിസ്ഥാന അളവ്) | SI Unit Name | SI Symbol | Dimensional Symbol |
| Length (നീളം) | metre | m | [L] |
| Mass (മാസ് / പിണ്ഡം) | kilogram | kg | [M] |
| Time (സമയം) | second | s | [T] |
| Electric Current (വൈദ്യുത പ്രവാഹം) | ampere | A | [A] or [I] |
| Thermodynamic Temperature (താപനില) | kelvin | K | [K] or [Θ] |
| Amount of Substance (പദാർത്ഥത്തിന്റെ അളവ്) | mole | mol | [mol] |
| Luminous Intensity (പ്രകാശ തീവ്രത) | candela | cd | [cd] |
3. Rules for Counting Significant Figures (സിഗ്നിഫിക്കന്റ് ഫിഗറുകൾ)
The reliable digits plus the first uncertain digit in a measurement are known as Significant Figures. Memorize these 5 essential rules for the Kerala Plus One exam:
- All non-zero digits are significant: For example, 285.4 cm has 4 significant figures.
- Zeros between two non-zero digits are always significant: For example, 2.005 kg has 4 significant figures.
- Leading zeros (zeros to the left of the first non-zero digit) are NEVER significant: For example, 0.0045 m has only 2 significant figures (4 and 5).
- Trailing zeros in a number without a decimal point are NOT significant: For example, 3400 m has 2 significant figures.
- Trailing zeros in a number with a decimal point ARE significant: For example, 3.500 g and 0.06900 both have 4 significant figures.
4. Dimensions and Dimensional Formulas (മാന സമവാക്യങ്ങൾ)
The dimensions of a physical quantity are the powers (exponents) to which the base quantities are raised to represent that quantity. Below is the master table of the most repeated dimensional formulas in Kerala DHSE examinations:
| Physical Quantity | Formula | SI Unit | Dimensional Formula |
| Area (വിസ്തീർണ്ണം) | Length × Breadth | m² | [M⁰ L² T⁰] |
| Volume (വ്യാപ്തം) | Length × Breadth × Height | m³ | [M⁰ L³ T⁰] |
| Density (സാന്ദ്രത) | Mass / Volume | kg m⁻³ | [M¹ L⁻³ T⁰] |
| Velocity / Speed (പ്രവേഗം) | Displacement / Time | m s⁻¹ | [M⁰ L¹ T⁻¹] |
| Acceleration (ത്വരണം) | Velocity / Time | m s⁻² | [M⁰ L¹ T⁻²] |
| Linear Momentum (ആക്കം) | Mass × Velocity | kg m s⁻¹ | [M¹ L¹ T⁻¹] |
| Force (ബലം) | Mass × Acceleration | N (kg m s⁻²) | [M¹ L¹ T⁻²] |
| Impulse (ഇംപൾസ്) | Force × Time | N s | [M¹ L¹ T⁻¹] |
| Work / Energy / Torque (പ്രവൃത്തി / ഊർജ്ജം) | Force × Displacement | J (N m) | [M¹ L² T⁻²] |
| Power (പവർ) | Work / Time | W (J s⁻¹) | [M¹ L² T⁻³] |
| Pressure / Stress (മർദ്ദം / സ്ട്രെസ്) | Force / Area | Pa (N m⁻²) | [M¹ L⁻¹ T⁻²] |
| Gravitational Constant (G) | (F × r²) / (m₁ × m₂) | N m² kg⁻² | [M⁻¹ L³ T⁻²] |
| Planck’s Constant (h) | Energy / Frequency | J s | [M¹ L² T⁻¹] |
| Coefficient of Viscosity (η) | F / (A × dv/dx) | N s m⁻² | [M¹ L⁻¹ T⁻¹] |
1 Mark Questions and Answers — Units and Measurement (ഒരു മാർക്ക് ചോദ്യങ്ങൾ)
Q1. Name the supplementary fundamental units in the SI system.
Answer:
- Radian (rad): Used to measure plane angle (dθ = ds / r).
- Steradian (sr): Used to measure solid angle (dΩ = dA / r²).
Q2. How many significant figures are there in (a) 0.007 m² (b) 2.64 × 10²⁴ kg (c) 0.2370 g cm⁻³?
Answer:
- (a) 0.007 m² has 1 significant figure (leading zeros are never significant).
- (b) 2.64 × 10²⁴ kg has 3 significant figures (powers of 10 do not affect significant figures).
- (c) 0.2370 g cm⁻³ has 4 significant figures (trailing zeros after a decimal point are significant).
Q3. Pick out the pairs of physical quantities that have the SAME dimensions: (a) Force and Power (b) Work and Torque (c) Impulse and Linear Momentum (d) Pressure and Stress.
Answer: (b) Work and Torque ([M¹ L² T⁻²]), (c) Impulse and Linear Momentum ([M¹ L¹ T⁻¹]), and (d) Pressure and Stress ([M¹ L⁻¹ T⁻²]) all have the exact same dimensions within their respective pairs. Only (a) Force and Power have different dimensions.
Q4. Name two physical quantities that have a unit in the SI system but NO dimensions.
Answer: Plane Angle (SI unit: radian) and Solid Angle (SI unit: steradian) are dimensionless quantities ([M⁰ L⁰ T⁰]) that possess SI units.
Q5. State the Principle of Homogeneity of Dimensions.
Answer: The Principle of Homogeneity of Dimensions states that the dimensions of all the terms on both sides of a physically valid equation must be identical. Only physical quantities having the same dimensions can be added, subtracted, or equated.
2 Mark Questions and Answers — Kerala Board Pattern (രണ്ട് മാർക്ക് ചോദ്യങ്ങൾ)
Q6. Light year is a unit of distance, not time. Justify this statement and give its value in metres.
Answer: A light year (ly) is defined as the total distance travelled by light in vacuum during one year at a speed of 3 × 10⁸ m/s. Because it measures spatial separation (Distance = Speed × Time), it is a unit of distance.
- Calculation: 1 Light Year = 3 × 10⁸ × 365.25 × 24 × 60 × 60 = 9.46 × 10¹⁵ m.
Q7. Check the dimensional correctness of the equation ½ mv² = mgh, where m is mass, v is velocity, g is acceleration due to gravity, and h is height.
Answer:
- Dimension of LHS (½ mv²): Since ½ is a dimensionless number: [LHS] = [M¹] × [L¹ T⁻¹]² = [M¹ L² T⁻²]
- Dimension of RHS (mgh): [RHS] = [M¹] × [L¹ T⁻²] × [L¹] = [M¹ L² T⁻²]
- Since [LHS] = [RHS], the given equation is dimensionally consistent (correct).
Q8. “A physical quantity has a unit, does it necessarily have dimensions? What about the converse?” Explain with examples.
Answer:
- First Part: No, a physical quantity having a unit need not have dimensions. For example, Plane Angle has the SI unit radian (rad), but it is dimensionless ([M⁰ L⁰ T⁰]).
- Converse Part: Yes! If a physical quantity has non-zero dimensions, it must always have a valid unit of measurement (for example, Force [M¹ L¹ T⁻²] has the unit Newton).
3 Mark Questions and Answers — Most Repeated PYQs (മൂന്ന് മാർക്ക് ചോദ്യങ്ങൾ)
Q9. The Van der Waals equation for one mole of a real gas is given by (P + a / V²)(V − b) = RT, where P is pressure, V is volume, T is absolute temperature, and R is the universal gas constant. Find the dimensions of the constants a and b.
Answer: According to the Principle of Homogeneity of Dimensions, only quantities with identical dimensions can be added or subtracted:
- Dimensions of constant b: Since (V − b) is valid, the dimension of b must equal the dimension of Volume (V): [b] = [V] = [M⁰ L³ T⁰]
- Dimensions of constant a: Since (P + a / V²) is valid, the dimension of (a / V²) must equal the dimension of Pressure (P): [a / V²] = [P] ⇒ [a] = [P] × [V²] [a] = [M¹ L⁻¹ T⁻²] × [L³]² = [M¹ L⁻¹ T⁻²] × [L⁶] = [M¹ L⁵ T⁻²]
Q10. The displacement of a particle at time t is given by the equation x = A t² + B t + C, where x is in metres and t is in seconds. Find the dimensions and SI units of A, B, and C.
Answer: By the Principle of Homogeneity, each term on the right-hand side must have the same dimension as displacement [x] = [L¹]:
- For A: [A t²] = [L¹] ⇒ [A] = [L¹] / [T²] = [M⁰ L¹ T⁻²]. (SI Unit: m s⁻²)
- For B: [B t] = [L¹] ⇒ [B] = [L¹] / [T¹] = [M⁰ L¹ T⁻¹]. (SI Unit: m s⁻¹)
- For C: [C] = [L¹] = [M⁰ L¹ T⁰]. (SI Unit: m)
Q11. State any three limitations of Dimensional Analysis (മാന വിശകലനത്തിന്റെ പരിമിതികൾ).
Answer:
- Cannot determine dimensionless constants: Dimensional analysis gives no information about pure numerical proportionality constants like ½, 2π, or 4 in a formula.
- Fails for trigonometric, logarithmic, and exponential functions: It cannot be used to derive equations containing sin θ, cos θ, log x, or eˣ.
- Cannot derive equations with addition or subtraction of multiple terms: Formulas like s = ut + ½ at² cannot be derived directly by the method of dimensions, though their dimensional consistency can be verified.
- Fails when a quantity depends on more than 3 physical variables in mechanics (because there are only three independent equations for M, L, and T).
5 Mark Essay & Derivation Questions (അഞ്ച് മാർക്ക് ചോദ്യങ്ങൾ)
Q12. (a) What are the main applications of dimensional analysis? (b) The time period (T) of oscillation of a simple pendulum may depend on the mass of the bob (m), length of the pendulum (l), and acceleration due to gravity (g). Derive the expression for the time period T using the method of dimensions.
Answer: (a) Main Applications of Dimensional Analysis:
- To check the dimensional consistency (correctness) of any physical equation.
- To derive the relationship between different physical quantities involved in a physical phenomenon.
- To convert the value of a physical quantity from one system of units (e.g., SI system) to another system (e.g., CGS system).
(b) Derivation of Time Period (T) of a Simple Pendulum: Let the time period T depend on mass (m), length (l), and acceleration due to gravity (g) according to the power law:
- T = k · mᵃ · lᵇ · gᶜ — (Equation 1) where k is a dimensionless proportionality constant.
Writing the dimensional formulas on both sides:
- Dimension of Time Period [T] = [M⁰ L⁰ T¹]
- Dimension of Mass [m] = [M¹]
- Dimension of Length [l] = [L¹]
- Dimension of Acceleration due to gravity [g] = [L¹ T⁻²]
Substituting these dimensions into Equation 1:
- [M⁰ L⁰ T¹] = [M¹]ᵃ · [L¹]ᵇ · [L¹ T⁻²]ᶜ
- [M⁰ L⁰ T¹] = [Mᵃ · Lᵇ⁺ᶜ · T⁻²ᶜ]
Equating the powers of M, L, and T on both sides:
- Comparing power of M: a = 0
- Comparing power of T: −2c = 1 ⇒ c = −½
- Comparing power of L: b + c = 0 ⇒ b = −c = +½
Substituting a = 0, b = ½, and c = −½ back into Equation 1:
- T = k · m⁰ · l¹/² · g⁻¹/²
- T = k √(l / g) From experimental measurement, the value of k = 2π. Therefore, the final formula is:
- T = 2π √(l / g)
Frequently Asked Questions (FAQ) — Kerala Plus One Physics Chapter 1
1. Is “Physical World” still Chapter 1 in the Kerala Plus One Physics 2026–27 Syllabus?
No. Following the rationalised SCERT Kerala and NCERT syllabus update, the introductory chapter “Physical World” has been excluded from board evaluation, making Units and Measurement the official Chapter 1 of Plus One Physics.
2. Which is the most important 3-mark or 5-mark question from Units and Measurement for the DHSE Kerala exam?
Deriving the formula for the time period of a simple pendulum (T = 2π √(l/g)) or centripetal force (F = mv²/r) using dimensional analysis, checking the correctness of equations using the Principle of Homogeneity, and finding the dimensions of constants in the Van der Waals equation are the most frequently repeated questions.
3. How can I download the Kerala Plus One Physics Chapter 1 Notes PDF in English and Malayalam Medium?
Students can read all 1-mark to 5-mark questions and answers directly on this page on KeralaStudyHub.in and use the print/PDF option to save these revision notes for offline exam preparation.




